Why not use what the Pro's are using?

Just a few of the almost 1000 uses!

* Convertible top repair.
* Plastic to plastic manufacturing.
* Musical Instruments.
* Boat Restoration.
* Electronic assembly/repair.
* Dental models/repair.
* Fishing lure manufacturing.
* Wetsuit manufacturing/repair.
* Auto rubber. upholstery & trim.
* Thread locking.
* Fiberglass auto body repair.
* Glass manufacturing/repair.
* Jewelry manufacturing/repair.
* O-Ring & vacuum belt repair.
* Wood projects.
* Toy manufacturing/repair.
* Metal manufacturing/repair.
* Craft manufacturing/repair.
* Plastic mold making/repairs.

Sample bonding Materials:

- Wood
- Metals
- Ceramics
- Porcelain
- China
- Glass
- Rubber
- Fiberglass
- Plastics
- Leather
- Resin
- pewter
- Fabric
- Vinyl
- Pottery
 
- Electronic
- PVC & ABS 

- Canvas 
- Styrofoam

Rhino Glue Instructions:
1. Use disposable gloves to protect hands from bonding.

2. Only use in a well ventilated area.

3. Twist off black cap.

4. Only use Flex Tips for hard to reach applications. Flex tips are designed for a tight fit on the bottle nozzle. Always remove after each use and replace with black cap.
5. Surface to be joined must be free of rust, grease or dust.
6. Spread on a thin layer of adhesive. Do not rub in. The thinner the layer, the better the bond. For porous materials, apply adhesive to both sides.

7. Best results are obtained at room temperature. Hold for 30 to 60 SECONDS. Different materials have different bonding rates. Rubbers and PVC’s bond almost instantly. Allow the glued items to stand for a few minutes. The bond will continue to get stronger over several hours.

7. Nozzle Maintenance: Before placing cap back on bottle, tap bottle to drain back down the adhesive and wipe the nozzle tip off using a disposable cloth rag.

9. Thoroughly test your project with our adhesive before use.

WARNING: Combustible. Eye irritant. Bonds skin instantly.Skin contact through clothing may cause burns. Use in well ventilated area. In case of eye contact,
flush with water for 15 minutes, call a physician. For skin contact, wash with mild soap and water. If product is swallowed do not induce vomiting and call a physician. Contains Cyanoacrylate. 
Keep away from children

Rhino Glue Storage Instructions:Always close lid after use, avoid exposure to heat, and direct sunlight. Rhino glue adhesive is best stored in a dark cool place.If stored outside a dark cool place, Rhino glue has a shelf life of about 6 months.If stored inside a dark cool place, Rhino glue has a shelf life of about 1 year.

Plasma Bond Instructions:

1) Use disposable gloves in a well ventilated area
2) Area surfaces must be clean and free of any oil or dust.
3) Remove cap and use a pair of scissors to cut 1/8 of a inch from nozzle tip.
The less you cut from the nozzle tip the better for precision adhesive flow.
4) Apply a thin layer under 1 mm thick.
5) Squeeze or click switch on the UV light approximately 1/2" above the
adhesive. Average cure time is 30 seconds, depending on the thickness of
the adhesive. Thick repairs apply 60 to 90 seconds of UV light. Project can
also be cured in sunlight.
5) Allow bond area to cool before sanding, painting or handling.
War ning: Causes skin irritation, Causes serious eye damage May cause an
allergic skin reaction. May cause respiratory irritation. Wear protective gloves
and eyewear. Keepaway from heat and flames. Do not breath vapors. UV light
can burn eyes. Do not point UV light at people or animals.
Keep away fr om children. Wash product from skin or eyes immediately
withwater. If skin irritation or rash occurs, get medical attention.

Warning: Causes skin irritation, Causes serious eye damage May cause an
allergic skin reaction. May cause respiratory irritation. Wear protective gloves
and eyewear. Keepaway from heat and flames. Do not breath vapors. UV light
can burn eyes. Do not point UV light at people or animals.
Keep away fr om children. Wash product from skin or eyes immediately
with  water. If skin irritation or rash occurs, get medical attention. 

Keep away from children

 

 

Rhino Epoxy Instructions:
1. CUT a small amount off the end of the putty stick.

2. MIX by kneading with fingers to a uniform color for 1 to 2 minutes.

If mixing is difficult, warm putty to room temperature.

3. APPLY immediately on a clean surface and replace the remaining

Rhino Epoxy in its plastic bag for storage in a cool place.

WARNING: May cause irritation of the skin. Wash with soap

and water after each use.(Epoxy) Adhesive. Keep away from children


 

K.G., Westminister, CA.

My son and his classmate had to design a tower for their Physics class. This structure had to be designed out of popsicle sticks. The kids used Rhino Glue and had the tallest, sturdiest structure and even supported a steel ball at the top. I must say that this glue truly holds, and my son and classmate took 1st place and earned an A for their grade.   Read more>>

* Stress Tough adhesives for impacts.

* Ready To Use - No Mixing or Clamping.

* Clearer Gel adhesive for all materials.

* One Drop - Instant Bonding.

* Industrial Grade Adhesive.

* Manufacturer direct.

* No more failed bonds, foaming or dry outs.

* Complete the job with Pro size bottles.

* 100% Money Back Guarantee.

The Worlds Tougher Glue is formulated for a stronger lasting bond that will glue virtually anything to anything! Rhino Glue is great to use in or around the house or industrial applications. Through many years of research and innovation, our high purity and fast setting adhesives will make your projects Rhino Tough.

 

Rhino Glue started out over ten years ago testing and demonstrating our formula at nationwide wide trade shows and events. While listening to their needs our customers would say they wanted the strongest glue available. They were not satisfied with the current store glues that fail to bond or dry out. Many glues are cheap to buy, but expensive to own as people continued to throw them out over and over again. With the latest technology Rhino Glue set out to provide a commercial grade adhesive that was faster, stronger and longer lasting.

 

What makes Rhino glue different from other glues? Rhino Glue's triple distilled processes increases higher bonding strength unlike other brands in the industry. With materials like plastic, vinyl, wood, metal and more. Rhino glue will do the job. It is extremely useful around the house, shop, RV or assembly work. Great for repairing anything from furniture to all your treasured projects. The real reward is that you get to use it all. No more dry outs in the bottle. Rhino Glue is used for anything from auto repair to marine enclosures and much more.